Top 6 Factors That Can Impact the Water Quality in Your Home

Water Quality in Scottsdale, AZ

Many factors can affect the quality of water in your residence. The condition of your plumbing, water usage, and sedimentation from water run-off are just some of the concerns. Whether you rely on a municipal supply or a well, here are the common factors affecting your home’s water quality.

1. Wastewater and Inadequate Sewage Treatment

One factor that affects water quality is debris that finds its way into drains and the sewage system. In turn, the debris clogs the drains and wastewater channels. The sludge can leak and find its way into freshwater sources that supply water to households.

Pollution in your water supply could be due to faults in your drainage system. Severe blockages in your sewer may force water to back up into your sink and water fixtures from the drains. The wastewater in parts of your home will become a serious health hazard if not addressed promptly.

Poor maintenance of the septic system can increase the risk of contaminants getting into your water supply. You may notice a soggy lawn and a foul smell when your drainage or septic tank has issues. Such problems can also contribute to pollution in your community.

At Zest Plumbing & Drain, we recommend the cleaning and maintenance of drainage and septic systems at least once every two years in the Phoenix valley. It is safer and more cost-effective to service your sewage system instead of waiting until there are faults.

2. Pollution and Sediments in Freshwater Sources

In most places near Phoenix, the water from the municipal supply is often saturated by minerals. Hard water contains minerals such as calcium and magnesium. While low levels of these minerals are good for your health, hard water has many adverse effects on your household.

If your water supply has hard water, you will frequently experience bouts of dry skin and scalp. Also, soap does not lather quickly, making household chores harder to do. You have to use more soap as well as more water for rinsing. That means you’ll be wasting water, and you may strain your drainage system in the process.

The limescale will adversely impact your plumbing and water heating equipment. It tends to accumulate on your plumbing fixtures, contributing to blockages and leaks. In turn, leakages can allow wastewater to find its way into your water supply.

Some studies suggest that limescale can shorten the lifespan of your equipment by up to 50%. One way to prevent damaging your equipment and plumbing is to install a water softening solution. You can contact Zest Plumbing & Drain in Phoenix for a system tailored to your preferences and needs.

3. Water Usage in Your Household

The way you treat your plumbing system and use water in your household can also contribute to pollution. Some of the most common contaminants are pesticides, oil, grease and garbage. These often find their way into sewage systems, streams and rivers.

Excessive use of water in your home can also affect your plumbing, drainage and septic systems. These systems are installed to handle the capacity of your household. Depending on your usage, you may have to upgrade your sewer treatment system.

You can control water usage by taking some practical steps such as replacing or adjusting fixtures. You may adjust your sprinklers to prevent unnecessary wastage. Where possible, consider drip irrigation to manage water usage around your home.

Your household’s water usage will also affect the frequency of plumbing maintenance tasks. The busier your home, the more tune-ups you should organize for your system. Otherwise, you might have to deal with multiple leaks and clogging.

4. Natural Organic Materials and Microbial Growth

Sedimentation and bacteria are some of the impurities that can find their way into the water system. Soil erosion generates fine sedimentation that can affect the health of the ecosystems in rivers and streams. With time, the source of water accumulates dead organic matter, which then encourages microbial growth.

Some microorganisms can cause diseases to humans and pets. Your water supply may contain bacteria such as E. coli, Salmonella and Shigella. Untreated sources of water could also have viruses such as noroviruses and rotaviruses.

If your residential water supply has considerable amounts of those microorganisms, you may notice symptoms such as nausea and diarrhea. Infants and the elderly are usually the most affected. If there are vulnerable people in your home, a water filtration system is essential for the health of your loved ones.

5. Household Plumbing and Water Fixtures

If you have water quality concerns in your home, another common culprit is the plumbing system. Malfunctions can impact water quality in several ways.

Outdated plumbing often includes materials like lead, which can gradually contaminate your water supply. If the water passing through the pipes is acidic, it can speed up the process of corrosion. As a result, your drinking water will have unhealthy levels of lead.

According to the EPA, lead pipes are more likely to be in homes built before 1986, but lead is not the only contaminant that could be affecting your water quality. Brass fixtures and chrome-plated faucets can also introduce contaminants. Some water fixtures are lead-soldered. They can corrode and contaminate your drinking water.

6. Your Water Heating Equipment

If your water heater goes unused for a long time, microorganisms can thrive, causing unpleasant odors. Some bacteria are harmless, but if you notice a sulfur smell, you may want to have your equipment checked.

The anode rod in your water heater protects your equipment from corrosion. When it is defective, the tank’s lining may deteriorate, and rust will develop, encouraging bacteria to spread.

One of the microorganisms that may be in your water heating equipment is legionella. Legionella is the microorganism responsible for Legionnaires’ disease. The bacteria can find their way into your plumbing, and eventually, your drinking water.

If there are people in your home with an immune condition, consider raising the temperature of your water to limit bacterial growth. You can increase the temperatures to 140 degrees Fahrenheit, but you must take precautions to prevent a scalding hazard. You may have to adjust the temperature for vulnerable people such as children and the elderly.

How to Address Water Quality Concerns

Despite water quality concerns, there are things you can do to anticipate and address pollution. Lead contaminants can have a devastating impact on your health. The best way to detect lead is to have your water tested.

Water testing can determine the contaminants in your water supply and their source. After the analysis, you should have a breakdown of the pollutants, which will determine the filtration system you’ll choose. If you have a well, it is advisable to conduct a test at least once a year.

Filtration may include a point-of-use or whole-house system, depending on your household’s needs. The system must meet the national standards for eliminating multiple pollutants. Maintaining your drains and water equipment is one of the best ways to keep contaminants at bay.

For drain cleaning, filtration and water softening solutions, you can rely on our top-rated plumbing team. Zest Plumbing & Drain is a family-owned and -operated business in Phoenix with an A+ ratings from the BBB. We can also install and troubleshoot water heating appliances of various makes and models. We offer affordable prices with up-front pricing. Contact our staff today at   (480) 588-3710 . We offer a 100% satisfaction guarantee on all our services.

Skip to content